分页: 3 / 3
Re: 5.8.3后,扩展都不能用了
发表于 : 2025年 9月 13日 13:51
由 Rag
1. Don't write nonsense.
If you don't have enough brains to figure out this problem - it doesn't mean that the browser is defective. The problem is in you.
2. If you can't figure it out, install and configure the browser, extensions again.
Re: 5.8.3后,扩展都不能用了
发表于 : 2025年 9月 14日 10:16
由 zhchgao
我刚下了5.9.3b3(最新版),原扩展都能用啊,没问题,我的是便携版。
Re: 5.8.3后,扩展都不能用了
发表于 : 2025年 9月 14日 13:09
由 Rag
zhchgao 写了: 2025年 9月 14日 10:16
我刚下了5.9.3b3(最新版),原扩展都能用啊,没问题,我的是便携版。
In version 5.8.3 all extensions are installed and work without problems.
CatsxpUser just doesn't have the desire/experience to fix the local failure.
Re: 5.8.3后,扩展都不能用了
发表于 : 2025年 9月 14日 15:41
由 kiscyn
CatsxpUser 写了: 2025年 9月 13日 08:22
这个问题是不能解决了嘛?原来的扩展不能用,卸载安装也不行……一个不能用扩展的浏览器……
你重新配一次不就好了。我就是老的和新的都打开,一个一个配置照搬,插件的配置重装导入,早都弄好了。这都做不到还用啥第三方浏览器啊
Re: 5.8.3后,扩展都不能用了
发表于 : 2025年 9月 15日 12:52
由 weizhenyu
我也是同样的故障。无论便携版还是安装版,表现相同。直到这个140版本,扩展安装不了,目前仍在各种尝试中。
Re: 5.8.3后,扩展都不能用了
发表于 : 2025年 9月 15日 13:07
由 weizhenyu
已解决。
方法如下:
1、将TEMP路径从Ramdisk改为SSD,重启系统
2、运行Catsxp,一切恢复正常
3、将TEMP路径从SSD改为Ramdisk,一切正常
Catsxp版本5.9.2(140)
Re: 5.8.3后,扩展都不能用了
发表于 : 2025年 10月 12日 01:08
由 CatsxpUser
weizhenyu 写了: 2025年 9月 15日 13:07
已解决。
方法如下:
1、将TEMP路径从Ramdisk改为SSD,重启系统
2、运行Catsxp,一切恢复正常
3、将TEMP路径从SSD改为Ramdisk,一切正常
Catsxp版本5.9.2(140)
我大概也是使用了内存虚拟硬盘做缓存的缘故。